TS141 SERIES 5K OHM THERMISTORS
  5KOhm@25°C   ·   Type: NTC   ·   Curve: Fenwall Curve 16
 
A thermistor is a "thermally sensitive resistor". It is a widely used fundamental electrical component. A thermistor is sensitive and reasonably priced. It does not require the cold junction of a thermocouple, and it is generally faster than Platinum RTD.
On this page:
  • Probe Styles: 1, 2, 7, 32, 64, 76, 81, 138, 154, 170, 176, 178, 188
  • Sensor Assemblies: 197, 198, 199, 200


    • Related:
    Specifications.
     

    The most popular sensor styles: 
  • Small Polyimide Tube (ideal for edge insertion into hot/cold plates) -  Probe Style 170 (also see the new Sensor Assembly 199)
  • Screw Down Metal Sheath - Probe Styles 188 or 64 (also see the new Sensor Assembly 197)
  • Epoxy Bead - Probe Style 1
    • Recommended for air streams: Probe Styles 76, 176, 64, 188; or a threaded metal sensor. (Also see the new Sensor Assemblies 197 or 200.)

    Custom built sensor housings and lead lengths can be provided for volume orders.
     

    P/N TS141-1 . . . US$ 9.50


    P/N TS141-2 . . . US$ 15.75


    P/N TS141-7 . . . US$ 25.95


    P/N TS141-32 . . . US$ 12.55


    P/N TS141-64 . . . US$ 13.60


    P/N TS141-76 . . . US$ 12.55


    P/N TS141-81 . . . US$ 19.95


    P/N TS141-138 . . . US$ 19.95


    P/N TS141-154 . . . US$ 18.30


    Small diameter and overall size is convenient for edge insertion into heat sink plate.

    P/N TS141-170 . . . US$ 10.25

    P/N TS141-176 . . . US$ 12.55


    P/N TS141-178 . . . US$ 13.60


    P/N TS141-188 . . . US$ 14.80


    The following 5+ Foot cables are built with mating connectors for the Model 5C7-195 benchtop temperature controller.




    P/N TS141-197 . . . US$ 39.80

    Built-to-order with normally a 3 week lead time (might be in stock - check with us), this sensor assembly mates with the Model 5C7-195 Temperature Controller. For the same sensor with shorter leads and no connector see Probe Style 188 above.


    P/N TS141-198 . . . US$ 37.55

    Built-to-order with normally a 3 week lead time (might be in stock - check with us), this sensor assembly mates with the Model 5C7-195 Temperature Controller. For the same sensor with shorter leads and no connector see Probe Style 32 above.


    P/N TS141-199 . . . US$ 37.00

    Built-to-order with normally a 3 week lead time (might be in stock - check with us), this sensor assembly mates with the Model 5C7-195 Temperature Controller. For the same sensor with shorter leads and no connector see Probe Style 170 above.


    P/N TS141-200 . . . US$ 38.00

    Built-to-order with normally a 3 week lead time (might be in stock - check with us), this sensor assembly mates with the Model 5C7-195 Temperature Controller. For the same sensor with shorter leads and no connector see Probe Style 176 above.