TS91 SERIES 10K OHM THERMISTORS
 10KOhm@25°C   ·   Type: NTC   ·   Curve: Fenwall Curve 16

A thermistor is a "thermally sensitive resistor". It is a widely used fundamental electrical component. A thermistor is sensitive and reasonably priced. It does not require the cold junction of a thermocouple, and it is generally faster than Platinum RTD. 
 
On this page:
  • Probe Styles: 1, 2, 7, 32, 64, 76, 81, 138, 154, 170, 176, 178, 188, 196
  • Sensor Assemblies: 197, 198, 199, 200


    • Related:
    Specifications.
     

    The most popular sensor styles: 
  • Small Polyimide Tube (ideal for edge insertion into hot/cold plates) -  Probe Style 170 (also see the new Sensor Assembly 199)
  • Screw Down Metal Sheath - Probe Styles 188 or 64 (also see the new Sensor Assembly 197)
  • Epoxy Bead - Probe Style 1
  • Biomedical Grade Sensor (very small, tight tolerance, long leads) - Probe Style 196
    • Recommended for air streams: Probe Styles 76, 176, 64, 188; or a threaded metal sensor. (Also see the new Sensor Assemblies 197 or 200.)

    Custom built sensor housings and lead lengths can be provided for volume orders.
     

    P/N TS91-1 . . . US$ 9.50



    P/N TS91-2 . . . US$ 15.75


    P/N TS91-7 . . . US$ 25.95



    P/N TS91-32 . . . US$ 12.55



    P/N TS91-64 . . . US$ 13.60



    P/N TS91-76 . . . US$ 12.55



    P/N TS91-81 . . . US$ 19.95


    P/N TS91-138 . . . US$ 19.95



    P/N TS91-154 . . . US$ 18.30


    Small diameter and overall size is convenient for edge insertion into heat sink plate.

    P/N TS91-170 . . . US$ 10.25


    P/N TS91-176 . . . US$ 12.55



    P/N TS91-178 . . . US$ 13.60



    P/N TS91-188 . . . US$ 14.80



    P/N TS91-196

    Dissipation Constant: 0.3mW/°C in still air, 2.5 mW/°C in stirred oil.
    Thermal Time Constant: 250 ms in stirred oil.
    May be cycled to +150°C.
    Continuous operation up to +100°C.
    Potting: Epoxylite - Passed cytotoxocity testing.
    Leads: Non-magnetic silver.
    Small enough to fit in a hypodermic needle.

    TS91-196 PRICING
    Stock Status: Non-standard item. Limited quantity available (<50).
     1-9 pc . . . US$ 39.50 Each
    10-24 . . . US$ 29.95 Each
    25-49 . . . US$ 24.65 Each
    50-99 . . . US$ 22.10 Each
    100-249 . . . US$ 19.75 Each
    (lower prices in higher order quantities)


    The following 5+ Foot cables are built with mating connectors for the Model 5C7-195 benchtop temperature controller.




    P/N TS91-197 . . . US$ 39.80

    Built-to-order with normally a 3 week lead time (might be in stock - check with us), this sensor assembly mates with the Model 5C7-195 Temperature Controller. For the same sensor with shorter leads and no connector see Probe Style 188 above.


    P/N TS91-198 . . . US$ 37.55

    Built-to-order with normally a 3 week lead time (might be in stock - check with us), this sensor assembly mates with the Model 5C7-195 Temperature Controller. For the same sensor with shorter leads and no connector see Probe Style 32 above.


    P/N TS91-199 . . . US$ 37.00

    Built-to-order with normally a 3 week lead time (might be in stock - check with us), this sensor assembly mates with the Model 5C7-195 Temperature Controller. For the same sensor with shorter leads and no connector see Probe Style 170 above.


    P/N TS91-200 . . . US$ 38.00

    Built-to-order with normally a 3 week lead time (might be in stock - check with us), this sensor assembly mates with the Model 5C7-195 Temperature Controller. For the same sensor with shorter leads and no connector see Probe Style 176 above.

       Privacy|||Legal|||Reciprocal Links|||Home
    Over 30 Years of Quality and Reliability