|Open Frame Temperature Controller with RS232 or RS485 Communications||
||Self-Contained Heat & Cool Temperature Controller|
Connect these 5C7 and 5R7 series temperature controllers to a PC for Data Acquisition (DAQ), as Automated Test Equipment (ATE) with a Test Executive, or for custom computer control of DC, AC, or TEC. Open frame. Available with VDC output, with RS232 or RS485 communications, or VAC output using RS232 or VAC output using RS485 communications.
New, RoHS Compliant, low cost bipolar 5R7-570 temperature controller is for peltier modules . This works over 2 temperature ranges. It has an optional remote set pot or a digital display/set front panel (shown with optional label). The controller will automatically switch between heating and cooling modes as needed.
|Open Frame Kilowatt Temperature Controllers||Self-Contained Heat or Cool Temperature Controller|
Kilowatts of power for Peltier Module arrays providing 12 to 28 vdc and up to 25 amperes of temperature control from the Client and each Server temperature controller - up to 680 watts from each controller. The Model 5C7-582 Temperature Controller ($379, 9-36V, 28A max, 1KW max) can be used alone, or it can be used as a Server to the Model 5R7-583 Client Temperature Controllers ($250, 12-28V, 25A max, 680W max each) to provide a tremendous amount of combined power for heating and/or cooling. Single control sensor. The 57-582 can also be used with the Model 5C7-584 Display (front panel PCB, $125) No web page at this time.
Our low cost DC heater controller or TEC controller (TECC). When used with peltier modules This small controller with Proportional Bandwidth and Integral Gain is an inexpensive way to keep cool and it can handle up to 24v and 7.5A. This is perfect for cooling small enclosures to a fixed temperature such as keeping an enclosure from going above room temperature. If you need to heat and also cool to maintain the temperature use the 5R7-570 (left) or 5R7-001 (above).
|Benchtop Temperature Controller with Settable Voltage||AC Voltage Temperature Controllers|
The benchtop 5C7-195 temperature controller is the easiest way to get started with peltier modules, or DC voltage heaters. At only $795, this controller works over 4 temperature ranges and also has a digital, adjustable voltage range. Primarily developed to help our customers define their OEM requirements, it's small size of approximately 8" X 7" X 2.5" and the front panel controls help to make this controller suitable for many applications, and it is convenient for becoming familiar with peltier modules, university courses, and R&D.
World class OEM style temperature controllers for AC. Enclosed, open frame, or with communications and PC Setup software. We have controllers that work with our Thermistors, or with Thermocouples (T/C).
|Our Expanding Line of Digital Temperature Controllers for Thermoelectric Devices, Fans and Resistive Heaters ...||Innovative and Cost Effective Customization...|
Our decades of experience in building Pulse Width Modulated temperature controllers has resulted in new, state-of-the-art, digital controllers for heaters and coolers that run on a DC voltage. The addition of our proportional control setting makes these controllers superior to simple bang-bang controllers (On/Off, which is an optional setting) so that you now have safe, efficient, and reliable control for peltier modules and other DC devices.
We were one of the first to supply low cost, PC compatible, and also custom TEC controllers (TECC) for thermoelectric devices, and have been doing so since 1999.
Compared to analog controllers, these digital controllers offer lower heat dissipation and lower prices. Our PC compatible versions are rich in features that can be accessed through our setup program, or your own custom program.
With the PC programmable controllers, we provide unique extras so that you can have your first controller up and running fast.
All controllers can be customized and custom built.
Start R&D with our standard controllers. High powered and feature rich, they will help you define your requirements.
Quality Custom Solutions and Outsourcing: If you are building a controller into a product, customization is the key to lower cost and a controller that has the "perfect fit".
Save money on volume orders by having a controller designed to your specifications. Use different Thermistors, Platinum RTD, Thermocouples or Temperature Transmitters. Use communications of your choice. Customize the circuit board and then go to SMT. Build for UL approval, certified medical, military spec, etc.
Fast Track your OEM Product
Give your design cycle a kick start . . . our expert advice can save you time and effort in helping to determine an effective thermal system.
to McShane, Inc.
Since 1964 we have provided cost
effective and innovative OEM products and services.
Temperature controllers and sensors are the flagship products, but our
strength is based on the long term
partnerships we have forged with our customers. With full design,
and manufacturing capability, we are able to provide the critical
for getting to market and staying competitive.
Temperature Controllers and Sensors are on this web site. We also provide custom OEM controllers for humidity, motion, flow, and more.
We can manufacture to AS9100 international aerospace quality standard, or MIL-SPEC, or with RoHS compliance, or using ISO 9001:2000 certification, and we can design to meet other certification requirements such as UL or CE . (Standard offerings only meet the certification requirements shown in their specifications.) Offshore manufacturing is available in high volume to lower cost.
Email or Fax Purchase Order.
TEL: +1 (330) 725-4568
Phone toll free in U.S.A.
We also accept...